Epoxy Materials：Mitsui Fine Chemicals, Inc.

Epoxy Materials

	:Chemical Substances Control Law Number
	:Fire Service Act

Polyetheramine

Name and Structural Formula	General Properties	PacCSCLging	Application	Notes
Polyetheramine D230, D400, D2000 Polyoxyalkylenediamine	Appearance: colorless ~ yellow liquid Viscosity: D230: 9.4 (mm2/s, 23℃) D2000: 313 (mPA • s, 20℃)	18kg can 200kg drum (D230: 195kg drum)	Epoxy Curing agent Polyurethane Polyurea Polyamide	7-324, 7-2567 CAS No. 9046-10-0 Type IV Class III petroleum Type IV Class IV petroleum
Polyetheramine T403, T5000 Polyoxyalkylenetriamine	Appearance: colorless ~ yellow liquid Viscosity: T403: 99.9 (mm2/s, 20℃) T5000: 1045(mm2/s, 20℃)	18kg can 200kg drum	Epoxy Curing agent Polyurethane Polyurea Polyamide	7-328, 7-2410 CAS No.39423-51-3 CAS No.64852-22-8 Type IV Class III petroleum Type IV Class IV petroleum

Aliphaticdiamine

Name and Structural Formula	General Properties	Packaging	Application	Notes
Ethylenediamine (EDA)	Appearance: transparent liquid Purity: 99.0% and above Specific gravity: 0.897-0.910		Bleaching auxiliary agent Chelating agent Corrosion inhibitor Elastomer fiber	CAS No. 107-15-3 UN1604 Class 8 Class II designated chemical substance Y
Diethylenetriamine (DETA)	Appearance: transparent liquid Purity: 99.0% and above Specific gravity: 0.950-0.955		Asphalt additive Chelating agent Corrosion inhibitor Sewage treatment agent Epoxy	chemical substance Y CAS No. 111-40-0 UN2079 Class 8 Class III
Triethylenetetramine (TETA)	Appearance: transparent liquid Specific gravity: 0.979-0.984 Amine number (mgKOH/g): 1410-1480		Asphalt additive Corrosion inhibitor Epoxy stiffening agent Hydrocarbon purity cultivator Lubricant additive	CAS No. 112-24-3 UN2259 Class 8
Tetraethylenepentamine (TEPA)	Appearance: transparent liquid Specific gravity: 0.988-0.998 Amine number (mgKOH/g): 1290-1370		Asphalt additive Corrosion inhibitor Epoxy stiffening agent Hydrocarbon purity cultivator Lubricant additive	CAS No. 112-57-2 UN2320 Class 8 Packing Group Ⅲ Marine pollutant Noxious Liquid Substances,category Y

Cycloaliphatic diamine

Name and Structural Formula

General Properties

Packaging

Application

Notes

PRO-NBDA
(Norbornanediamine)
(Bicyclo[2,2,1]
heptanebis
(methylamine))

Color : APHA10-40
Purity : 99% min
Freezing point : 20.8 ℃

Viscosity : 20(mPa・s,25 ℃)

18kg can

200kg drum

Epoxy Curing agent
Polyamide
Polyimide

Polyurethane(polyuria)

ENCS,ISHL:(4)1732
CAS:56602-77-8
REACH:will register Until Jul 2017
EINECS:260-280-7
TSCA:Have inventory

UN:2735

Aromaticdiamine

Name and Structural Formula	General Properties	Packaging	Application	Notes
4,4’-Diaminodiphynyl Ether (4,4’-DADPE)	Appearance: grey crystalline powder Purity: 99.5% and above Melting point: 191.5℃ and above	20kg fiber drum	Heat resistant resin • varnish • film, etc. raw material Epoxy resin stiffening agent	3-854 CAS No. 101-80-4 UN Non hazardous TSCA Have Inventory EINECS/ELINCS 202-977-0
1,3-BIS (3-aminophenoxy) benzene (APB-N)	Appearance: light yellow ~ light brown powder Purity: 97% and above Melting point: 107~110℃	20kg cardboard box	Heat resistant resin • varnish • adhesive agent, etc. raw material	3-3948 CAS No. 10526-07-5 UN 3077 TSCA Have Inventory EINECS/ELINCS 234-082-6
DETDA (Diethyltoluenediamine)	Appearance: Dark red clear liquid Purity: 97.5% min	18kg can 200kg drum	Epoxy Curing agent Polyurea Polyurethane	3-3638/3-3639 CAS No. 68479-98-1/2095-01-4 Type IV Class III petroleum
Bisaniline M 4,4’-(m-phenylene diisopropylidene) dianiline	Appearance: light yellow powder Purity: 99.0% and above Melting point: 113-115℃	50kg fiber drum	Heat resistant resin raw material	4-1612 CAS No. 2687-27-6 UN 3077 TSCA Have Inventory EINECS/ELINCS No Inventory
Bisaniline P 4,4’-(p-phenylenediisopropylidene) dianiline	Appearance: light yellow powder Purity: 99.0% and above Melting point: 164℃ and above	50kg fiber drum	Heat resistant resin raw material	4-1573 CAS No. 2716-10-1 UN Non hazardous TSCA Have Inventory EINECS/ELINCS No Inventory

Hardening Accelerator

Name and Structural Formula	General Properties	Packaging	Application	Notes
Dimethylaminopropylamine	Appearance: colorless liquid melting point < -50℃ purity: 99% min		Epoxy curing agent	2-158 CAS No.109-55-7 Type IV Class II petroleum
ABAm (Aminobenzylamine)	Appearance: reddish-brown liquid Solidifying point: 15℃ and below	16kg can	Epoxy resin stiffening agent	（3）-3897 CAS No.4403-71-8 4403-70-7 Type IV Class III petroleum UN2735 TSCA NO Inventory EINECS/ELINCS 412-230-2／610-164-0


Copyright 2014 MITSUI FINE CHEMICALS, Inc. All right reserved.